Generic filters
Exact matches only
Filter by Custom Post Type
Select Page

42mm x 10mm Neodymium Female Threaded Pot


Female Stud ThreadM8
Stud Length11mm
Direction Of MagnetismThrough Thickness
Magnet TypeNeodymium
Magnet GradeN45
Pull Force81 Kgs
Maximum Temperature80°C

All prices are exclusive of GST and freight.

Order QuantityPer Single Item
10-49$22.05 Save 10%
50-99$17.15 Save 30%
100-499$15.93 Save 35%
500$14.70 Save 40%


Our 42mm x 10mm Neodymium Female Threaded Pot has an outside diameter of 42mm, a thickness of 10mm and has an 11mm M8 threaded female stud. This holding magnet has a pull force of fifty kilograms before releasing. (on a 3mm mild steel plate)

This 42mm x 10mm Neodymium Female Threaded Pot magnet is also available in a standard pot with; a hole or with a hook.

Customers can identify our 42mm x 10mm Neodymium Female Threaded Pot with our stock code: CAPN42F


Uses for our 42mm x 10mm Neodymium Female Threaded Pot:

Inside a round steel, casing sits a mounted Neodymium magnet. This changes the magnetic field produced by the magnet and deflects the field to create a powerful single sided holding magnet.

As a result of our magnets being very powerful on one side when compared to a raw magnet and because of the hole going through the thickness of the pot, they can be used as an excellent holding tool. Retail businesses no longer have to use permanent fixtures that damage property.

Instead, our pot magnets attach to any magnetic surface and by using the conveniently placed hole, can hang a wide range of items from signage to managing electrical cabling. Best of all they are completely removable should you need to relocate them.

Abrasion from this magnet may affect contact surfaces and due to this, we do not recommend that you use these magnets on fragile or sensitive surfaces. If you are wanting to use these in such areas we recommend the use of our rubber caps.

These rubber caps sit over the pot magnet and protect both the magnet and the surface they are being applied to.

Please be aware that using a rubber cap will reduce the pull force of the pot magnet. Because of this, we recommend that you use a larger pot magnet than you need. This is in order to make up for the loss in the pull force of the pot.

Neodymium pot magnets have a very high power to size ratio, even the smallest Neodymium magnets have a surprisingly large amount of pull. If subjected to temperatures of over 80°C Neodymium’s will start to permanently lose their magnetic properties. For high-temperature environments, we recommend the use of Samarium magnets.


Need some help? Click here to get in touch!

Should you need help with choosing a magnet or if you’re unsure with what type of magnet you need, feel free to contact us. Our team of experienced staff are more than happy to assist.

Should we not have a size of magnet that you desire we can custom make to your order.

As a result of these being so powerful and wanting to attract to each other, we must warn you of some potential hazards.

  • Neodymium Magnets can be deadly if ingested, not recommended for children.
  • Use eye protection while using our magnets because if two join with force they may break or shatter.
  • Magnets can wipe magnetic media such as credit cards, keep magnets away from these to avoid data loss.


See below for a list of some, of our Neodymium FEMALE THREADED pot magnets;
Code Outer Diameter Thickness Rod Thread Rod Length Pull
CAPN60F 60mm 15mm M8 13mm 110 Kgs
CAPN25F 25mm 8mm M5 10mm 20 Kgs
CAPN32F 32mm 8mm M6 9mm 22 Kgs
CAPN36F 36mm 8mm M5 9mm 45 Kgs
CAPN42F 42mm 9mm M8 11mm 50 Kgs
CAPN48F 48mm 11.5mm M8 12mm 81 Kgs

Additional information

Weight 0.1 kg
Dimensions 4.2 × 4.2 × 2 cm
Quantity discounts
1-9 10-49 50-99 100-499 500+
NZD$24.50 NZD$22.05 NZD$17.15 NZD$15.93 NZD$14.70