FlyMag & FlyMesh
Our FlyMag packs contain special magnetic strips which are specially designed to perfectly align with each other, thereby neatly sealing when joined together.
Both strips come with a strong VHB self-adhesive backing.
This product has been successfully utilised by thousands of DIY Kiwis who have either insulated their home with Double Glazing or kept insects out of their homes with homemade Fly Screens.
For best results ensure you match our FlyMag and FlyMesh together as you may get an inferrior hold by mixing third party products.
Due to exclusivity agreements/arrangements this range is only available from leading hardware stores and building supply outlets.
The easy DIY solution!
5m Magnetic Strip
Part A (5m) and B (5m) Magnetic Strip and corner adhesives.
10m Magnetic Strip
Part A (10m) and B (10m) Magnetic Strip and corner adhesives.
30m Magnetic Strip
Part A (30m) and B (30m) Magnetic Strip and corner adhesives.
Specially made Fiberglass mesh for use with the Flymag™ range of magnetic strip packs.
CODE: FLYMESH2 (1.2M x 1.2M)
CODE: FLYMESH ROLL (1.2Mx30M Roll)
Out of Corners?
Vinyl Corners For FlyMag & FlyMesh
30 additional vinyl corner pieces for use with our FlyMag and FlyMesh products which are available from all leading hardware stores nationwide.
Product code: CORNERPACK
Need a hand?
FlyMag and FlyMesh FAQ
Due to arrangements with hardware stores nationwide, we are not able to sell direct to the public. You can however find these at any leading hardware retailer.
If you are a wholesaler/retailer and want to stock our product contact us to see if we can supply you.
We are sorry to hear something is missing. Please return your pack to the hardware store your purchased it from and they will be happy to swap it out for another one.
Ensure the surface is clean and free of dust or any other surface contamination prior to applying the FlyMag.
VHB tape requires time to cure to a surface. When applying place pressure on the strip from edge to edge and allow time for it to adhere to the surface for 4-6 hours.
If you are attempting to adhere to a surface such as silicone VHB will not be effective as it cannot adhere to this.
Part A is completely flat with no groove whereas part B has a groove running down the centre of the strip.