Our 2mm x 620mm Self Adhesive Magnetic Sheeting has a width of 620mm and a thickness of 2mm. One side is coated in a self-adhesive coating that will stick on contact (once the backing is peeled away). This product comes in a full 10 Metre roll. If you are looking at ordering less than 10 Metres of this product click here to check out our per metre rate.
Customers can identify our 2mm x 620mm Self Adhesive Magnetic Sheeting with our stock code: SHTADH2
Uses for our 2mm x 620mm Self Adhesive Magnetic Sheeting:
Our magnetic sheets are made of a Strontium Ferrite powder in a polymer matrix. One side a self-adhesive backing that once the protective paper is peeled away will stick on contact to most surfaces. This self-adhesive side is not magnetic. The opposite plain side is magnetic. This premium quality magnetic sheeting provides you with the highest possible quality product at the best price.
Our magnetic sheeting is so easy to use, just use a handy pair of scissors or a Stanley knife to cut the strip down to size and apply to any ferrous surface. You can even put this magnetic sheeting through a guillotine to make a clean straight cut. Create your own magnets for the fridge, a reminder for your co-workers to fill the dishwasher or make a label to identify the product in the factory.
We do not advise that you use this on vehicles or other sensitive areas. This sheet will cause abrasion damage to such sensitive areas. As a result, we only recommend that you use our CARMAG product. This is due to the additional protective layer on the magnet to protect against abrasion.
As a result of these being so powerful and wanting to attract to each other, we must warn you of some potential hazards.
- Magnets can be deadly if ingested, not recommended for children.
- Use eye protection while using our magnets because if two join with force they may break or shatter.
- Magnets can wipe magnetic media such as credit cards, keep magnets away from these to avoid data loss.
- Take care when handling sheeting as edges can be very sharp if cut on an angle. Take extra care while handling newly cut sheets
Need some help? Click here to get in touch.
Have a question with any of our products? We are here to help.
Use the form below to inquire about this product. The more you tell us, the more we can help.