Our 0.8mm x 620mm Receptive Sheeting has a width of 620mm and a thickness of 0.8mm and is not magnetic. This product comes in a full 30 Metre roll. If you are looking at ordering less than 30 Metres of this product click here to check out our per metre rate.
Customers can identify our 0.8mm x 620mm Receptive Sheeting with our stock code: SHTMAGRECEPTIVE
Uses for our 0.8mm x 620mm Receptive Sheeting:
Our Receptive sheeting is not magnetic and is made of iron particles contained in a polymer matrix. Instead of the sheet being attracted to a ferrous surface, here magnets will be attracted to the sheet. This sheet is also known by the term iron sheet due to being made of small iron particles. This premium quality receptive sheeting provides you with the highest possible quality product at the best price.
Our receptive sheeting is so easy to use, just use a handy pair of scissors or a Stanley knife to cut the strip down to size and apply to any ferrous surface. You can even put this magnetic sheeting through a guillotine to make a clean straight cut. Create your own magnets for the fridge, a reminder for your co-workers to fill the dishwasher or make a label to identify the product in the factory. Ensure you use a sharp blade to avoid tearing and keep in mind that because you are effectively cutting through iron that blades will start to go blunt quickly.
We do not advise that you use this on vehicles or other sensitive areas. This sheet will cause abrasion damage to such sensitive areas. As a result, we only recommend that you use our CARMAG product. This is due to the additional protective layer on the magnet to protect against abrasion.
We also offer our magnet receptive in a white with write on wipe off laminate option. Click here to check it out!
As a result of these being so powerful and wanting to attract to each other, we must warn you of some potential hazards.
- Magnets can be deadly if ingested, not recommended for children.
- Use eye protection while using our magnets because if two join with force they may break or shatter.
- Magnets can wipe magnetic media such as credit cards, keep magnets away from these to avoid data loss.
- Take care when handling sheeting as edges can be very sharp if cut on an angle. Take extra care while handling newly cut sheets
Need some help? Click here to get in touch.
Have a question with any of our products? We are here to help.
Use the form below to inquire about this product. The more you tell us, the more we can help.