27mm x 25mm Alnico Pot

Description

This 27mm x 25mm Alnico Pot has a threaded M6, 5mm hole with a diameter of 27mm and a height of 25mm.

Customers can identify this 27mm x 25mm Alnico Pot with our stock code: POT833

Uses for our 27mm x 25mm Alnico Pot:

Like our other pot magnets, these have a steel surround that acts as a casing to deflect the magnetic polarity to the holding surface.

Furthermore, when compared to a similar sized raw or uncapped magnet, pot magnets have a far greater level of magnetic pull. as a result of the steel plate on the holding surface, a circuit is created between the North and South Poles of the magnet. This manipulates the magnet to create the stronger pull and makes a bigger size to strength ratio.

In Addition, our Alnico Pot magnets also have a high-temperature tolerance. Being able to resist demagnetization of temperatures of up to 540°C.

Customers use these magnets in a variety of applications such as in small sensors in electronics and general holding applications in the home, to massive separation systems in high-temperature environments.

As a result of these being so powerful and wanting to attract to each other, we must warn you of some potential hazards.

• Magnets can be deadly if ingested, not recommended for children.
• Use eye protection while using our magnets because if two join with force they may break or shatter.
• Magnets can wipe magnetic media such as credit cards, keep magnets away from these to avoid data loss.