Our 66mm Female Rubber Encased Holding Magnet has an outside diameter of 66mm, a thickness of 8mm and has an M6 threaded female stud. This holding magnet has a pull force of 42 kilograms before releasing (on a 3mm mild steel plate) and also has an epoxy rubber like coating.
Customers can identify our 66mm Female Rubber Encased Holding Magnet With Stud, with our stock code: RUBBERMAG66FS
Uses for our 66mm Female Rubber Encased Holding Magnet With Stud:
Our Rubbermag’s are ideal for use in those environments where a softer touch is required. Due to the strong Neodymium magnet contained within the epoxy casing, these magnets have a strong pull but are gentle enough for use on areas like car paint. We feel so strongly about this that our own sign-writing team uses these magnets daily to hold prints on client vehicles, boats, cars or even planes. These magnets work a treat!
The female version of our Rubbermag’s come with a threaded stud that can be used to attach your own handle. Alternatively, if you are looking for a rubber magnet with a handle then try our RUBBERMAG43FS or as we also call it, our Signmag. This comes with a handle making it easy to apply and remove.
Be aware that due to the epoxy coating these magnets have a lower pull opposed to a raw magnet. Because of this, we recommend that you use a larger magnet than you need.
Neodymium rubber magnets have a very high power to size ratio, even the smallest Neodymium magnets have a surprisingly large amount of pull. If subjected to temperatures of over 80°C Neodymium’s will start to permanently lose their magnetic properties. For high-temperature environments, we recommend the use of Samarium magnets.
If applying to a delicate surface ensure the application surface is clean, these magnets will protect against abrasion but only on a clean surface.
See below for a list of our FEMALE THREADED rubber magnets;
|RUBBERMAG22F||22mm||6mm||M4 Hole||3 Kgs|
|RUBBERMAG31F||31mm||6mm||M4 Hole||4 Kgs|
|RUBBERMAG43F||43mm||6mm||M5 Hole||6 Kgs|
|RUBBERMAG43FS||43mm||6mm||M5 Stud & Handle||6 Kgs|
|RUBBERMAG66F||66mm||8mm||M6 Hole||42 Kgs|
|RUBBERMAG66FS||66mm||8mm||M6 Hole||42 Kgs|
As a result of these being so powerful and wanting to attract to each other, we must warn you of some potential hazards.
- Magnets can be deadly if ingested, not recommended for children.
- Use eye protection while using our magnets because if two join with force they may break or shatter.
- Magnets can wipe magnetic media such as credit cards, keep magnets away from these to avoid data loss.
Need some help? Click here to get in touch.