60mm x 15mm Neodymium Pot With Eyelet

Description

Our 60mm x 15mm Neodymium Threaded Pot With Eyelet has an outside diameter of 60mm, a thickness of 11.5mm and has a 35mm M8 eyelet bolt. This holding magnet has a pull force of one hundred and ten kilograms before releasing. (on a 3mm mild steel plate)

This 60mm x 15mm Neodymium Threaded Pot With Eyelet is also available in a standard pot with a hole, a female threaded stud, a male threaded rod or with a hook.

Customers can identify our 60mm x 15mm Neodymium Threaded Pot With Eyelet, with our stock code: CAPN60E

 

Uses for our 60mm x 15mm Neodymium Threaded Pot With Eyelet:

Inside a round steel, casing sits a mounted Neodymium magnet. This changes the magnetic field produced by the magnet and deflects the field to create a powerful single sided holding magnet.

As a result of our magnets being very powerful on one side when compared to a raw magnet and because of the hole going through the thickness of the pot, they can be used as an excellent holding tool. Retail businesses no longer have to use permanent fixtures that damage property.

Instead, our pot magnets attach to any magnetic surface and by using the conveniently placed hole, can hang a wide range of items from signage to managing electrical cabling. Best of all they are completely removable should you need to relocate them.

Abrasion from this magnet may affect contact surfaces and due to this, we do not recommend that you use these magnets on fragile or sensitive surfaces. If you are wanting to use these in such areas we recommend the use of our rubber caps.

These rubber caps sit over the pot magnet and protect both the magnet and the surface they are being applied to.

Please be aware that using a rubber cap will reduce the pull force of the pot magnet. Because of this, we recommend that you use a larger pot magnet than you need. This is in order to make up for the loss in the pull force of the pot.

Neodymium pot magnets have a very high power to size ratio, even the smallest Neodymium magnets have a surprisingly large amount of pull. If subjected to temperatures of over 80°C Neodymium’s will start to permanently lose their magnetic properties. For high-temperature environments, we recommend the use of Samarium magnets.

 

See below for a list of our Neodymium EYELET pot magnets;

Outer Diameter	Thickness	Eye-Bolt Thread	Eyelet Height	Pull
48mm	11mm	M8	40mm	81 Kgs
60mm	15mm	M8	35mm	110 Kgs
75mm	18mm	M8	35mm	155 Kgs
95mm	20mm	M8	35mm	180 Kgs
32mm	8mm	M6	30mm	22 Kgs
36mm	8mm	M6	30mm	28 Kgs
42mm	9mm	M6	40mm	50 Kgs

 

---

 

As a result of these being so powerful and wanting to attract to each other, we must warn you of some potential hazards.

• Magnets can be deadly if ingested, not recommended for children.
• Use eye protection while using our magnets because if two join with force they may break or shatter.
• Magnets can wipe magnetic media such as credit cards, keep magnets away from these to avoid data loss.

---

 

Need some help? Use the form below and we will get back to you.