Generic filters
Exact matches only
Filter by Custom Post Type
Select Page

60mm x 15mm Neodymium Pot


Cap Hole Diameter8.5mm
Direction Of MagnetismThrough Thickness
Magnet TypeNeodymium
Magnet GradeN45
Pull Force95 Kgs
Maximum Temperature80°C

All prices are exclusive of GST and freight.

Order QuantityPer Single Item
10-49$41.40 Save 10%
50-99$32.20 Save 30%
100-499$29.90 Save 35%
500$27.60 Save 40%


Our 60mm x 15mm Neodymium pot has an outside diameter of 60mm, a thickness of 15mm and a 8.5mm hole. This holding magnet has a pull force of ninety five kilograms before releasing. (on a 3mm mild steel plate)

Customers can identify our 60mm x 15mm Neodymium pot with our stock code: CAPN60


Uses for our 60mm x 15mm Neodymium Pot:

Inside a round steel, casing sits a mounted Neodymium magnet. This changes the magnetic field produced by the magnet and deflects the field to create a powerful single sided holding magnet.

As a result of our magnets being very powerful on one side when compared to a raw magnet and because of the hole going through the thickness of the pot, they can be used as an excellent holding tool. Retail businesses no longer have to use permanent fixtures that damage property.

Instead, our pot magnets attach to any magnetic surface and by using the conveniently placed hole, can hang a wide range of items from signage to managing electrical cabling. Best of all they are completely removable should you need to relocate them.

Abrasion from this magnet may affect contact surfaces and due to this, we do not recommend that you use these magnets on fragile or sensitive surfaces. If you are wanting to use these in such areas we recommend the use of our rubber caps.

These rubber caps sit over the pot magnet and protect both the magnet and the surface they are being applied to.

Please be aware that using a rubber cap will reduce the pull force of the pot magnet. Because of this, we recommend that you use a larger pot magnet than you need. This is in order to make up for the loss in the pull force of the pot.

Neodymium pot magnets have a very high power to size ratio, even the smallest Neodymium magnets have a surprisingly large amount of pull. If subjected to temperatures of over 80°C Neodymium’s will start to permanently lose their magnetic properties. For high-temperature environments, we recommend the use of Samarium magnets.


Need some help? Click here to get in touch!

Should you need help with choosing a magnet or if you’re unsure with what type of magnet you need, feel free to contact us. Our team of experienced staff are more than happy to assist.

Should we not have a size of magnet that you desire we can custom make to your order.

As a result of these being so powerful and wanting to attract to each other, we must warn you of some potential hazards.

  • Neodymium Magnets can be deadly if ingested, not recommended for children.
  • Use eye protection while using our magnets because if two join with force they may break or shatter.
  • Magnets can wipe magnetic media such as credit cards, keep magnets away from these to avoid data loss.


See below for a list of some, of our Neodymium pot magnets;
Code Outer Diameter Thickness Hole Diameter Pull
CAPN95 95mm 22mm 10mm 180 Kgs
CAPN16 16mm 5mm 3.5mm 3 Kgs
CAPN20 20mm 6mm 4mm 6 Kgs
CAPN25 25mm 8mm 5.5mm 14 Kgs
CAPN32 32mm 8mm 5mm 22 Kgs
CAPN36 36mm 8mm 5.5mm 28 Kgs
CAPN42 42mm 9mm 6mm 50 Kgs
CAPN48 48mm 10mm 8.5mm 63 Kgs
CAPN60 60mm 15mm 8.5mm 95 Kgs
CAPN75 75mm 18mm 10mm 155 Kgs

Additional information

Weight 0.32 kg
Dimensions 8 × 8 × 6 cm
Quantity discounts
1-9 10-49 50-99 100-499 500+
NZD$46.00 NZD$41.40 NZD$32.20 NZD$29.90 NZD$27.60