Search
Generic filters
Exact matches only
Filter by Custom Post Type
Select Page

20mm x 6mm Neodymium Male Threaded Pot

NZD$6.50

Diameter20mm
Rod ThreadM4
Rod Length8mm
Thickness6mm
Direction Of MagnetismThrough Thickness
Magnet TypeNeodymium
Magnet GradeN45
Pull Force6 Kgs
Maximum Temperature80°C
CoatingNickel

All prices are exclusive of GST and freight.

Order QuantityPer Single Item
1-9$6.50
10-49$4.88 Save 25%
50-99$3.58 Save 45%
100-499$3.25 Save 50%
500$2.60 Save 60%

Description

Our 20mm x 6mm Neodymium Male Threaded Pot has an outside diameter of 20mm, a thickness of 6mm and has a 8mm M4 threaded rod. This holding magnet has a pull force of six kilograms before releasing. (on a 3mm mild steel plate)

This 20mm x 6mm Neodymium Male Threaded Pot magnet is also available in a standard pot with a hole.

Customers can identify our 20mm x 6mm Neodymium Male Threaded Pot with our stock code: CAPN20M

 

Uses for our 20mm x 6mm Neodymium Male Threaded Pot:

Inside a round steel, casing sits a mounted Neodymium magnet. This changes the magnetic field produced by the magnet and deflects the field to create a powerful single sided holding magnet.

As a result of our magnets being very powerful on one side when compared to a raw magnet and because of the hole going through the thickness of the pot, they can be used as an excellent holding tool. Retail businesses no longer have to use permanent fixtures that damage property.

Instead, our pot magnets attach to any magnetic surface and by using the conveniently placed hole, can hang a wide range of items from signage to managing electrical cabling. Best of all they are completely removable should you need to relocate them.

Abrasion from this magnet may affect contact surfaces and due to this, we do not recommend that you use these magnets on fragile or sensitive surfaces. If you are wanting to use these in such areas we recommend the use of our rubber caps.

These rubber caps sit over the pot magnet and protect both the magnet and the surface they are being applied to.

Please be aware that using a rubber cap will reduce the pull force of the pot magnet. Because of this, we recommend that you use a larger pot magnet than you need. This is in order to make up for the loss in the pull force of the pot.

Neodymium pot magnets have a very high power to size ratio, even the smallest Neodymium magnets have a surprisingly large amount of pull. If subjected to temperatures of over 80°C Neodymium’s will start to permanently lose their magnetic properties. For high-temperature environments, we recommend the use of Samarium magnets.

 


Need some help? Click here to get in touch!

Should you need help with choosing a magnet or if you’re unsure with what type of magnet you need, feel free to contact us. Our team of experienced staff are more than happy to assist.

Should we not have a size of magnet that you desire we can custom make to your order.

As a result of these being so powerful and wanting to attract to each other, we must warn you of some potential hazards.

  • Neodymium Magnets can be deadly if ingested, not recommended for children.
  • Use eye protection while using our magnets because if two join with force they may break or shatter.
  • Magnets can wipe magnetic media such as credit cards, keep magnets away from these to avoid data loss.

 

See below for a list of some, of our Neodymium MALE THREADED pot magnets;
Code Outer Diameter Thickness Rod Thread Rod Length Pull
CAPN48M 48mm 10mm M8 12mm 81 Kgs
CAPN16M 16mm 5mm M4 9mm 3 Kgs
CAPN20M 20mm 6mm M4 8mm 6 Kgs
CAPN25M 25mm 8mm M5 10mm 14 Kgs
CAPN32M 32mm 8mm M6 11mm 22 Kgs
CAPN36M 36mm 8mm M6 11mm 28 Kgs
CAPN42M 42mm 9mm M8 12mm 50 Kgs

Additional information

Weight 0.25 kg
Dimensions 2 × 2 × 2 cm
Quantity discounts
1-9 10-49 50-99 100-499 500+
NZD$6.50 NZD$4.88 NZD$3.58 NZD$3.25 NZD$2.60