Generic filters
Exact matches only
Filter by Custom Post Type
Select Page

10mm Rectangle Cap


Direction Of MagnetismThrough Thickness
Magnet TypeNeodymium
Magnet GradeN45
Pull Force3 Kgs
Maximum Temperature80°C

All prices are exclusive of GST and freight.

Order QuantityPer Single Item
10-49$2.70 Save 10%
50-99$2.40 Save 20%
100-499$2.25 Save 25%


Our 10mm Rectangle Cap has a length of 10mm, a width 13.5mm, a thickness of 5mm and also has a 3mm countersunk hole. This holding magnet has a pull force of three kilograms before releasing. (on a 3mm mild steel plate)

Customers can identify our 10mm Rectangle Cap with our stock code: CAPREC10


Uses for our 10mm Rectangle Cap:

Inside a rectangle, steel casing sits a mounted Neodymium magnet. This changes the magnetic field produced by the magnet and deflects the field to create a powerful single sided holding magnet.

As a result of our magnets being very powerful on one side when compared to a raw magnet and because of the hole going through the thickness of the pot, they can be used as an excellent holding tool. Retail businesses no longer have to use permanent fixtures that damage property.

Instead, our cap magnets attach to any magnetic surface and by using the conveniently placed hole, can hang a wide range of items from signage to managing electrical cabling. Best of all they are completely removable should you need to relocate them.

Abrasion from this magnet may affect contact surfaces and due to this, we do not recommend that you use these magnets on fragile or sensitive surfaces.

Neodymium cap magnets have a very high power to size ratio, even the smallest Neodymium magnets have a surprisingly large amount of pull. If subjected to temperatures of over 80°C Neodymium’s will start to permanently lose their magnetic properties. For high-temperature environments, we recommend the use of Samarium magnets.

We also have a large range of round Neodymium pot magnets should you need a greater pull force. For a list of all our rectangle caps please look below.


Need some help? Click here to get in touch!

Should you need help with choosing a magnet or if you’re unsure with what type of magnet you need, feel free to contact us. Our team of experienced staff are more than happy to assist.

Should we not have a size of magnet that you desire we can custom make to your order.

As a result of these being so powerful and wanting to attract to each other, we must warn you of some potential hazards.

  • Neodymium Magnets can be deadly if ingested, not recommended for children.
  • Use eye protection while using our magnets because if two join with force they may break or shatter.
  • Magnets can wipe magnetic media such as credit cards, keep magnets away from these to avoid data loss.


See below for a list of our Neodymium cap magnets;
Code Length Width Thickness Hole Diameter Pull
CAPREC120 120mm 13.5mm 5mm 3mm 62 Kgs
CAPREC10 10mm 13.5mm 5mm 3mm 3 Kgs
CAPREC15 15mm 13.5mm 5mm 3mm 6 Kgs
CAPREC20 20mm 13.5mm 5mm 3mm 8 Kgs
CAPREC30 30mm 13.5mm 5mm 3mm 17 Kgs
CAPREC40 40mm 13.5mm 5mm 3mm 22 Kgs
CAPREC50 50mm 13.5mm 5mm 3mm 25 Kgs
CAPREC60 60mm 13.5mm 5mm 3mm 30 Kgs
CAPREC80 80mm 13.5mm 5mm 3mm 40 Kgs
CAPREC100 100mm 13.5mm 5mm 3mm 52 Kgs

Additional information

Weight 0.006 kg
Dimensions 1 × 1.35 × 1 cm
Quantity discounts
1-9 10-49 50-99 100-499 500+
NZD$3.00 NZD$2.70 NZD$2.40 NZD$2.25 NZD$2.10