Our Small Oil Filter Magnet has a collapsed diameter of 65mm, being able to expand to a diameter of 85mm. It has a width of 18mm and is 12mm thick. The casing is made of a coloured PVC with powerful Neodymium magnets embedded inside to draw out ferrous contaminant from the oil filter within.
Customers can identify our Small Oil Filter Magnet with our stock code: FILTERMAGSML
Uses for our Small Oil Filter Magnet:
Our Small Oil Filter Magnets are designed to be a solution to the problem of ferrous containment within the engine of your vehicle. This ferrous contaminant can cause damage to the inner workings of the engine of your vehicle and reduce the life of each component.
These filters are made to be reusable time and time again, just slip the filter magnet on the oil filter and it will passively collect and hold any ferrous contaminant inside the oil filter. When you replace the oil filter take off the filter magnet and insert on the new filter to start the process again. A simple and easy solution to extend the life of your engine.
Our filter magnets come in two different sizes allowing for use on a range of different oil filters, from small everyday filters in cars to commercial grade filters in heavy trucks. No job is too tough for our filters! If subjected to high temperatures, above 80°C then they will begin to permanently lose their magnetism.
As a result of these being so powerful and wanting to attract to each other, we must warn you of some potential hazards.
- Magnets can be deadly if ingested, not recommended for children.
- Use eye protection while using our magnets because if two join with force they may break or shatter.
- Magnets can wipe magnetic media such as credit cards, keep magnets away from these to avoid data loss.
Need some help? Click here to get in touch.