Our Wide Format Printable White Receptive Sheeting with WO/WO and Self Adhesive has a width of 1200mm and a thickness of 0.32mm, one side is white with a write on wipe off laminate and the other is plain magnet receptive. This product is our 1-14 Metre Rate. If you are looking at ordering more than 14 Metres of this product click here to check out our per roll rate.
Customers can identify our Wide Format Printable White Receptive Sheeting with WO/WO and Self Adhesive with our stock code: SHTMRWHTWOADH1200-M
Uses for our Wide Format Printable White Receptive Sheeting with WO/WO and Self Adhesive:
This sheeting is a lot packed into one. It is a receptive sheet made of iron particles and is therefore not magnetic, instead magnets will be attracted to the sheet itself. On one side there is a white printable surface that is coated with a write on wipe off laminate and the other side a self adhesive backing that is protected by a protective sheet. Just peel the sheet away when you are ready to apply the receptive.
We do not advise that you use this on vehicles or other sensitive areas. This sheet will cause abrasion damage to such sensitive areas. As a result, we only recommend that you use our CARMAG product. This is due to the additional protective layer on the magnet to protect against abrasion.
Should you want a design printed on this media for application on a vehicle, head on over to signwriting.co.nz and look at what we can do for you!
This sheeting can be used in most wide format printers and the white surface can be directly printed. Ensure you allow time for your prints to dry.
As a result of these being so powerful and wanting to attract to each other, we must warn you of some potential hazards.
- Magnets can be deadly if ingested, not recommended for children.
- Use eye protection while using our magnets because if two join with force they may break or shatter.
- Magnets can wipe magnetic media such as credit cards, keep magnets away from these to avoid data loss.
- Take care when handling sheeting as edges can be very sharp if cut on an angle. Take extra care while handling newly cut sheets
Need some help? Click here to get in touch.