Our 50mm x 1.6mm Magnetic Strip has a width of 50mm and a thickness of 1.6mm, one side has a groove running down the centre of the strip and marks the non-magnetic side of the strip. This product comes in a full 30 Metre roll. If you are looking at ordering less than 30 Metres of this product click here to check out our per metre rate.
Customers can identify our 50mm x 1.6mm Magnetic Strip with our stock code: STR5016
Uses for our 50mm x 1.6mm Magnetic Strip:
Our plain 50mm x 1.6mm Magnetic Strip is great for craft use and is used in our popular carded products which can be found in all leading hardware stores. Industrial applications such as elevators and escalators also use these magnetic strips for their sensors. A Strontium Ferrite powder in a polymer matrix makes our 50mm x 1.6mm Magnetic Strip have its magnetic properties allowing it to be applied to any ferrous surface.
Our magnetic strip is so easy to use. Just cut to size with a handy pair of scissors or a Stanley knife and your good to go. Looking for an adhesive option? We also stock the same size with a self-adhesive backing so you can apply them to surfaces without the need to get glue involved!
Should you need a large amount of pre-cut strips we can do the cutting for you using our equipment! No waiting when the show on your doorstep they are ready to go straight out of the box. We provide you with an easy and complete solution to your project!
As a result of these being so powerful and wanting to attract to each other, we must warn you of some potential hazards.
- Magnets can be deadly if ingested, not recommended for children.
- Use eye protection while using our magnets because if two join with force they may break or shatter.
- Magnets can wipe magnetic media such as credit cards, keep magnets away from these to avoid data loss.
Need some help? Click here to get in touch.