This 20.5mm x 19mm Alnico Pot has a threaded M6, 5mm hole with a diameter of 20.5mm and a height of 19mm.
Customers can identify this 20.5mm x 19mm Alnico Pot with our stock code: POT832
Uses for our 20.5mm x 19mm Alnico Pot Magnets:
Like our other pot magnets, these have a steel surround that acts as a casing to deflect the magnetic polarity to the holding surface.
Furthermore, when compared to a similar sized raw or uncapped magnet, pot magnets have a far greater level of magnetic pull. as a result of the steel plate on the holding surface, a circuit is created between the North and South Poles of the magnet. This manipulates the magnet to create the stronger pull and makes a bigger size to strength ratio.
In Addition, our Alnico Pot magnets also have a high-temperature tolerance. Being able to resist demagnetization of temperatures of up to 540°C.
Customers use these magnets in a variety of applications such as in small sensors in electronics and general holding applications in the home, to massive separation systems in high-temperature environments.
As a result of these being so powerful and wanting to attract to each other, we must warn you of some potential hazards.
- Magnets can be deadly if ingested, not recommended for children.
- Use eye protection while using our magnets because if two join with force they may break or shatter.
- Magnets can wipe magnetic media such as credit cards, keep magnets away from these to avoid data loss.
Need some help? Click here to get in touch.